home *** CD-ROM | disk | FTP | other *** search
- M3425 DIP SWITCH SETTINGS
-
-
-
- In order to set your 3425 drive to oprate as drive C: or as D:
- You need to locate the 8 pin dip switch located on the back of
- the PCB. The proper settings ars as follows...
-
- 1) DRIVE C: PINS 1-4 ON, 5,6, AND 7 OFF, AND 8 ON
-
- 2) DRIVE D: PINS 1-4 ON 5 AND 6 OFF, 7 ON , AND 8 OFF
-
- NOTE: IF YOU ARE USING A TWISTED CABLE THEN YOU NEED TO SET YOUR
- DRIVE UP AS D: (SEE ST506 CABLING)
-
-